ClickCease
02081541810

Mon - Fri: 8:00 - 17:30 | Sat: By appointment

020 8674 3377 service@smithsoflondon.co.uk

Range Rover plug-in hybrid charging port

B1DC5 Fault Code Fix

Every time the vehicle was started, the same message appeared: “EV mode temporarily unavailable.”

Mrs P could see it wasn’t something that was going to clear on its own. The petrol engine ran from start-up on every journey. Electric driving was not an option. EV mode simply would not engage. Fuel was being used whether the trip was around the corner or across town.

That meant one of the main reasons for choosing a plug-in hybrid was no longer there.

That was what Mrs P was dealing with on her 2020 Range Rover Evoque PHEV. EV mode had stopped working and she didn’t know what was behind it.

She got in touch with Smith’s of London in Croydon to have the fault looked into. An appointment was arranged and the vehicle was with us shortly after.

Range Rover plug-in hybrid charging port

The fault prevented the Range Rover Evoque PHEV from operating in EV mode, forcing the petrol engine to remain running

 

A Range Rover EV mode fault like this can stem from more than one cause, and the correct B1DC5 fault code fix depends on identifying the right one. Thorough testing is the only way to get there. If your Range Rover PHEV won’t switch to EV mode, contact Smith’s of London in Croydon and our technicians will help identify the problem.

Understanding How the Range Rover EV Mode Fault Was Presenting

Mrs P’s Range Rover Evoque PHEV was brought to Smith’s of London, Croydon, and our technicians began by speaking with her to understand how the fault had been presenting. The petrol engine was running continuously from start-up, EV mode could not be selected, and the “EV mode temporarily unavailable” message appeared on the dashboard display every time the vehicle was used.

With the symptoms confirmed, our technicians connected dealer-level diagnostic equipment to the vehicle and ran a full system scan. The scan produced one stored fault code:

  • B1DC5 High-voltage Coolant Heater #1, no operation.
B1DC5-93 high-voltage coolant heater fault code on Range Rover Evoque PHEV diagnostic scan

The initial diagnostic scan identified B1DC5-93, indicating no operation from the high-voltage coolant heater

 

The serial data was reviewed alongside the fault code to give our technicians a clear view of how the vehicle’s systems were operating.

The fault code indicated an issue with the high-voltage coolant heater, but at this point it was not clear whether the heater itself had failed, whether a wiring or connection problem was involved, or whether the fault sat elsewhere in the circuit. Thorough PHEV hybrid system diagnostics were needed to confirm the root cause.

What Led to the B1DC5 Fault Code on the Range Rover Evoque PHEV?

The scan gave our technicians a firm starting point, and they worked through the fault methodically from there. Before the correct B1DC5 fault code fix could be carried out, the root cause had to be identified through structured testing.

Step 1: Consulting manufacturer technical information

Our technicians turned to the manufacturer’s technical information service to research the B1DC5 fault code and how it applies to the Range Rover Evoque PHEV.

In a plug-in hybrid, the high-voltage coolant heater is a key component within the thermal management system. It draws energy from the high-voltage battery to heat coolant, which warms the cabin without the petrol engine needing to run. A failure of this component means the cabin can only be heated by running the petrol engine. When that happens, the system may keep the petrol engine running and EV mode becomes unavailable.

This was important because it explains how a heater fault can prevent the vehicle from operating in electric mode. It pointed our technicians toward the high-voltage coolant heater and the electrical circuit connected to it as the area to investigate.

Step 2: Checking for technical service bulletins

Our technicians also looked through the manufacturer’s database for any technical service bulletins or known issues relating to the B1DC5 fault code on this model.

Manufacturer records showed that this type of heater failure had been reported on the Evoque PHEV. Knowing this didn’t remove the need for testing, but it gave valuable context and confirmed the investigation was heading in the right direction.

Step 3: Visual inspection and electrical checks

A visual inspection was carried out on the high-voltage coolant heater and surrounding components, looking for damage, corrosion, or disturbance. Electrical testing of the wiring and connectors associated with the heater was completed at the same time.

  • No external issues were found. The wiring and connectors were in good condition, with no signs of damage or contamination.

Step 4: Active testing of the high-voltage coolant heater

Using dealer-level diagnostic equipment, our technicians carried out active testing to activate the high-voltage coolant heater directly and monitor whether it responded.

The high-voltage coolant heater operates within the vehicle’s high-voltage electrical system, so this step was handled by HV-trained technicians with insulated tooling and the required safety equipment.

  • There was no response from the heater when activated. Our technicians confirmed the unit had failed.
Range Rover TOPIx diagnostic test confirming a high-voltage coolant heater fault

Manufacturer diagnostic testing confirmed a fault with the high-voltage coolant heater and directed replacement of the unit

 

Step 5: Circuit verification and wiring checks

To rule out faults elsewhere in the circuit, our technicians completed circuit verification and wiring checks between the control module and the high-voltage coolant heater.

  • Testing confirmed the circuit was operating within expected parameters, with no issues found in the wiring or connections.

The conclusion

The findings were consistent across every stage of the investigation. The high-voltage coolant heater was non-responsive during active testing, and our technicians identified it as the root cause. This failure has been reported on the Evoque PHEV before, and testing confirmed Mrs P’s vehicle had been affected. Without the heater working, the only option for cabin heat was the petrol engine. That kept the engine running at all times and locked EV mode out. It was what had been causing the Range Rover EV mode fault Mrs P had been experiencing.

Once the root cause was clear, the repair could go ahead: replacing the high-voltage coolant heater as part of the B1DC5 fault code fix.

The Repair Process: Replacing the High-Voltage Coolant Heater

Smith’s of London contacted Mrs P to explain the findings after confirming the root cause. We took her through the test results, confirmed that wiring and connections had been checked and cleared, and explained why a new high-voltage coolant heater was needed. Once Mrs P approved the repair, work got under way.

High-voltage safety procedures

  • Before any work began, the vehicle’s high-voltage system was isolated and made safe in line with manufacturer procedures. An HV-trained technician completed the repair using insulated tooling and dedicated safety equipment throughout.

Component replacement

  • The heater was disconnected from the high-voltage system and then removed from the coolant circuit.
  • Our technicians installed the new unit and inspected all electrical connections, mounting points, and seals to confirm everything was correctly fitted.
  • The coolant circuit was refilled and the system was run to confirm correct operation.
Failed high-voltage coolant heater removed from a Range Rover Evoque PHEV

The failed high-voltage coolant heater removed from the Range Rover Evoque PHEV before the replacement unit was fitted

 

Post-repair verification

  • Fault codes were cleared from the control module.
  • Our technicians verified the replacement heater was functioning correctly using dealer-level diagnostic software.
  • The vehicle was run and monitored to confirm EV mode was available and the petrol engine had stopped running continuously.
  • A scan of all vehicle systems confirmed no fault codes remained after the repair.

EV Mode Restored: The B1DC5 Fault Code Fix on Mrs P’s Range Rover

Once the work was finished, Mrs P’s Range Rover Evoque PHEV left Smith’s of London with EV mode working again. The petrol engine was no longer running when it shouldn’t have been, the “EV mode temporarily unavailable” message had cleared, and the vehicle was operating as a plug-in hybrid should.

Mrs P was happy with the outcome. A thorough investigation had identified the root cause, the failed high-voltage coolant heater was replaced, and the vehicle was back to full hybrid operation in a single visit. She was kept informed at every stage, with clear communication building her confidence in the repair.

Smith’s of London provided Mrs P with a competitive repair cost, a shorter turnaround than a main dealer, and the confidence that the work was carried out by HV-trained technicians with the specialist equipment and safety procedures that hybrid vehicle work requires.

Range Rover EV Mode Fault? Let Smith’s of London Take a Look

When a plug-in hybrid can no longer access EV mode, it has a real impact. Fuel costs increase, electric driving is lost, and the vehicle stops working as it was designed to. A professional hybrid car EV repair can put things back to normal.

If your Range Rover PHEV is running on petrol when it should be on electric, or EV mode has become unavailable, getting the system thoroughly assessed makes sense. At Smith’s of London in Croydon, our technicians have the skills and experience to carry out a Range Rover EV repair with the accuracy and thoroughness it demands. We’ll assess the fault, explain what we find, and let you know what we recommend before any work starts.

Call Smith’s of London on 020 8674 3377 to talk through the problem or book your vehicle in. We’d be happy to help.

Why Choose Smith’s of London?

  • Dealer-Level Equipment: We use manufacturer diagnostic software and dealer-level equipment to carry out thorough technical evaluations.
  • HV-Trained Technicians: Our team includes technicians trained to work safely on high-voltage systems, equipped with the insulated tooling and safety equipment that hybrid and electric vehicle work demands. Not every garage can offer this.
  • Honest Communication: We explain what we find clearly and give you the information you need to make your own decision.
  • Evidence-Led Diagnosis: Every repair starts with a structured technical evaluation to identify the root cause before any parts are replaced.
  • Guaranteed: All work is covered by our 12-month parts and labour guarantee.
  • {{review-count}} customers rate Smith’s of London {{average-rating}} stars on Google. See what they say about us.

Call Now 020 8674 3377Save on Range Rover Servicing